Let's talk about Fireplaces.
Tartarian fireplaces were not designed to burn anything. The metal back plating found inside of the fireplace and chimney was connected to the rebar, upper tower dome and outside metal poles which concentrated the power of the aether...
2/ and focused that free energy into the chimney which ionized the air inside of it. This ionized air coupled with the rising and falling of hot and cold air currents created a pressurized electric vacuum inside of the chimney.
3/ During the winter, chimneys acted as pressurized electric vacuums radiating trapped heat inside of the chimney out through the fireplace, metal sculptures and air vent ducts connected to the inside of the chimney.
4/ During the summer, the process would reverse and the fireplace and air vent ducts would suck in heat into the fireplace and air ducts connected to the inside of the chimney from the inside of the house and by way of the ionized air from the aetheric electrically charged...
5/ ...metal back plate inside of the chimney would force the heat up the chimney and out of the house.
All of this info was taken from this article below if anyone is interested in learning more on this subject, there is some wild stuff in it.
eclypticstudios.com/home/?p=3025
Share this Scrolly Tale with your friends.
A Scrolly Tale is a new way to read Twitter threads with a more visually immersive experience.
Discover more beautiful Scrolly Tales like this.