Guess who got a new @oshpark sticker today! 
All strapped in for a mere 480 solder joints!
Probably the smallest 12 slot #RC2014 backplane ever!
Outstanding... I mean Up Standing!
With a fairly minimal build, I have CP/M running on it :-)
I probably had this running an hour ago... however, this board has an old version of RomWBW, and it is expecting a RTC Module. If there isn't one fitted, it'll sit there for 2 mins displaying absolutely nothing.
So I have been down a rabbit hole troubleshooting a non-problem!
So I have been down a rabbit hole troubleshooting a non-problem!
It lives! It lives!
Actually very surprised by my Openscad abilities here, but the first end cap has come out so well, I'm going to print another one for the other end :)
This is a bit more Cray. Would you like to Seymour?
... oh, nothing much, just calculating Mandelbrot fractals on my Z80 based RC2014 that happens to bare a striking resemblance to a Cray-1. What are you up to?
As this thread is getting a lot of interest, I should promote my BandCamp or something.
Well, basically, this is a #RC2014 Zed, fully loaded with extra I/O modules. It is on a custom Flex PCB backplane made by @oshpark with 3D printed/lasercut supports tindie.com/products/semac…
Well, basically, this is a #RC2014 Zed, fully loaded with extra I/O modules. It is on a custom Flex PCB backplane made by @oshpark with 3D printed/lasercut supports tindie.com/products/semac…
