Spike Profile picture
Dec 16, 2025 9 tweets 8 min read Read on X
If you think ‘bugging out’ means hiking all day and sleeping wherever you collapse, you’re missing a critical skill.

Patrol bases are how people actually operate when they need to stay hidden and functional. 🧵 Image
Patrol Bases – An Introduction

When platoon sized elements or smaller (roughly under 50 personnel) need to temporarily stop while operating in the field, whether it be to rest, reorganize after an engagement, hide during a long reconnaissance mission, perform maintenance on equipment, or run a basic base for planning and executing their next operations, a Patrol Base (PB) is formed. The PB exists as a concealed and secure location for units to rest, resupply, and perform mission planning. The PB exists for less than 24 hours and the area is never reused by the same unit twice. The strength of these bases lies in their stealth and mobility. The unit is concealed and is never truly hunkered down, so they can leave at a moment’s notice.Image
As usual, little disclaimer right here. THIS IS NOT ADVICE TO GO DO ANYTHING ILLEGAL. DO NOT BREAK THE LAW. DO NOT CONSIDER BREAKING THE LAW. I DO NOT SUPPORT ANY EXTREMIST ORGANIZATIONS OR MOVEMENTS. I DO NOT SUPPORT ANY INSURRECTIONIST MOVEMENTS. I DO NOT ADVOCATE FOR ANY EXTREMIST ORGANIZATIONS, MOVEMENTS, OR IDEAOLOGIES. PLEASE DON’T DRONE STRIKE ME.
Site Selection.

PB site selection should be a two step process. It begins with identifying a tentative location via satellite imagery, aerial reconnaissance by drone or aircraft, or from a map. Ideally, a secondary and tertiary location are also selected as backups. Following selection, the area must actually be confirmed to be adequate. If it is found lacking, the unit should move to confirm the secondary or tertiary locations.

These potential PB locations should be scouted by a small reconnaissance team ahead of time, or at least ahead of the unit, to confirm that the terrain is suitable, to scout for enemy presence and enemy area denial assets, and to identify potential routes of withdrawal.

Ideal locations for PBs include dense forests, areas with dense vegetation (see kudzu), or areas that are rugged and limit visibility. Areas that are near natural barriers can help provide some extra security, but note that they may be more observed by hostile ISR, so keeping some distance may be ideal. In general, ridgelines and hilltops, commonly used trails, roads, paths, and any locations that show recent animal or human activity should be avoided like the plague.Image
Establishing the Patrol Base.

Once the element has entered the PB area, a full 360 degree security perimeter must be created. From here there are two common shapes used. The first is a cigar shape for PBs that consist of squad sized patrols, and the other is a triangular PB for platoon sized patrols. Note that for both options, a Listening Post or Observation Post (see my article on OPs) may be attached.

In the cigar shape, the squad or squads are split into two lines that face in opposite directions, looking outwards. Toward the middle of the line, the shape bulges slightly outward, allowing greater fields of fire.

In the triangle shape, the HQ element is kept in the center. Out from this center, a triangle is formed by the squads in lines. At the 10, 2, and 6 o’clock positions, machine guns should be positioned.

In both of these cases, hasty fighting trenches may be dug, about 18 inches or 50 cm deep. Along with these fighting trenches, there may also be holes dug for urine, caches of goods, or slightly dug in sleeping positions to protect sleeping personnel from incoming fire and shrapnel. Defensive positions should be located along defensive lines and camouflaged using natural foliage, dirt, or other covers to avoid ISR detection. Units inside the PB should be as silent as possible and should communicate with hand signals whenever it can be done to prevent detection.Image
Image
Work Priorities.

Following the successful establishment of the PB, the unit can begin following a set list of work priorities that need to be conducted while inside the PB. They are as follows:

1. Security.
This is a continuous priority that stays active as long as the PB is in operation. Units watch for enemy movement or potential threats. Squad sector sketches are drawn, platoon fire plans are established, and claymores or other area denial assets are employed as appropriate.

2. Withdrawal Plan.
A plan or series of plans is created for leaving the PB. This could be in case of threat or simply when the time to move comes. Rendezvous points and secondary PBs are identified and planned.

3. Communications.
This is another continuous priority. PBs operating with radios must stay in contact with command at all times in case the situation on the ground changes or new orders come in. In areas with strict emissions control, field telephones (see my article on them) and runners may be employed instead.

4.Mission Planning.
The next operational steps of the unit are planned, orders are issued, and rehearsals may be conducted.

5. Weapons and Equipment Maintenance.
Machine guns, radios, weapons systems, night vision devices, and any other pieces of vital unit equipment are checked and maintained. During maintenance, no more than one third of the unit’s allotment of whatever is being worked on should be down at a time. If the squad has three machine guns, only one is down at a time. During this period, security elements are raised to compensate.

6. Water Supply.
If needed, watering parties are planned. Rucksacks are filled with empty canteens and taken to a fill point. This could be a pump, a river, a lake, or any other fresh water source. The water should still be treated before consumption.

7. Mess, Rest, and Sleep.
All members of the PB are cycled through periods of rest and sleep. At minimum, four uninterrupted hours should be given in a 24 hour period. If interruptions are common, blocks of sleep that add up to six hours are generally adequate for most soldiers. Ideally soldiers should get eight to ten hours. The same rules for equipment being down apply to soldiers as well. No more than one third of the men should be asleep at any one point.

8.Alert Plans, Resupply, and Sanitation.
Positions should be checked periodically and at least one leader should always be alert. Ammunition, meals, and equipment should be adequately shared amongst the men. Finally, slit trenches (latrines) are designated and prepared.Image
Breaking Down the Patrol Base.

Once the unit has fully rested, the next strategic steps are planned, or 24 hours have elapsed, the PB must be broken down and the units need to exit the area. Recall that PBs rely heavily on their hiddenness, so all members should employ the “Leave No Trace” principle from Boy Scouts. Pits should be filled in and earth replaced. Any and all gear must be packed up in full and stowed with the unit. No garbage should be left behind in any way.

The area should be checked for dropped items, footprints, human refuse, or anything that could be indicative of someone staying in that area. During the tear down process, the unit must ensure that noise and emissions discipline is practiced. Finally, once the unit is ready to leave, a final security sweep should be conducted to ensure that there are no hostile forces nearby and that the unit is not being actively tracked. Once finished, all PB related operations are complete.Image
Conclusion.

For units that are operating in the field for long periods of time, the Patrol Base is a godsend. Their concealability allows the men to rest when sleep is desperately needed, particularly if sleep debt has been accumulated from being actively in the field for days without any rest. Through the discipline of the men and adherence to the priority of work, PBs can refresh a unit that was on the cusp of total exhaustion and mission failure, bringing them back into the field and back into the fight.

Act accordingly.Image
Thank you everyone for checking this post out! This is a re-release of an older piece and a teaser for my upcoming book that is releasing at the end of the month!

Pieces like this get deboosted in the algorithm so interactions like comments and quote tweets helps a lot!

If you are interested in my other written works, the highights tab of my profile has over 100 feature length pieces!

If you want to support me, check out my books on amazon!

amazon.com/stores/Spikes-…Image

• • •

Missing some Tweet in this thread? You can try to force a refresh
 

Keep Current with Spike

Spike Profile picture

Stay in touch and get notified when new unrolls are available from this author!

Read all threads

This Thread may be Removed Anytime!

PDF

Twitter may remove this content at anytime! Save it as PDF for later use!

Try unrolling a thread yourself!

how to unroll video
  1. Follow @ThreadReaderApp to mention us!

  2. From a Twitter thread mention us with a keyword "unroll"
@threadreaderapp unroll

Practice here first or read more on our help page!

More from @spikesguides

Feb 17
You’ve got minutes before they’re on top of you.

Is your defensive position secure, or will it collapse at first contact? 🧵

Knowing how to build a fighting position properly is a lifesaver. Here's how you do it. Image
Basic Fighting Positions

For as long as man has found it pertinent to kill one another, there has been a need for field construction to build defensive and offensive structures to gain an advantage over an adversary. From the siege towers of medieval Europe to the hastily built trenches of modern Ukraine, fighters have felled many trees and dug many pits to defend positions, obfuscate their location, and protect them from fire. While every rifleman is not a combat engineer, every rifleman should have a repertoire of the basic fighting positions that they can dig in the field under their belt.

Fighting positions are more than simple holes to hide in during artillery barrages. Fighting positions do provide a lot of protection from enemy fire, shrapnel from explosives, and other forms of indirect fire but they also provide an easy way to organize a team into fields and sectors of fire to overwatch large areas with little overlap. Positions can be built in a manner that allows units to defend a location of any shape or size, offering opportunities for even full 360-degree coverage if the situation demands it.Image
Position selection.

When selecting a location for a fighting position the acronym of KOCOA is commonly utilized for assessing prime locations for fighting positions. KOCOA is often used for tactical and strategic battlefield analysis. The letters stand for:

K – Key Terrain: Key terrain is terrain features that give a tactical advantage to either side or it may be an objective that must be taken or held. This could be a hill, ridge, gulley, bridge, or a building that oversees an area with a lot of enemy movement. Key terrain should be occupied or at the very least, denied to the enemy.

O – Observation and Fields of Fire: The ability to see your enemy and effectively engage them with direct or indirect fire is a core necessity of a proper fighting position. Fields of fire should be clear. Examples of an ideal field of fire would be down the slope of a hill or across an open field as both provide excellent line of sight for the defender while minimizing their own visual signature (especially for the one looking down a hill, these are some of the best fighting position locations).

C – Cover and Concealment: Cover protects from bullets and shrapnel while concealment hides one from view. Ideally a fighting position should offer both protection and stealth. If a decision must be made for only of those, the selection of which will depend entirely on circumstances unique to the situation such as the enemy, the team and their abilities, the objective, etc.

O – Obstacles: Obstacles will slow or halt enemy movement. Obstacles can be natural such as rives and cliffs or manmade with area denial tools like razor wire and minefields. Positions should be placed behind or beside obstacles in order to funnel enemy movement into the team’s fields of fires.

A - Avenues of Approach: Routes in which the enemy force can use to advance toward the team or their objective are the avenues of approach. These should be covered with fields of fire. Positions should not be on or in these areas unless there are no other options as they place the team in direct confrontation with the opposing force.

While the acronym is clumsy like most military acronyms, KOCOA provides leaders with a simple tool to identify strong areas for positions to be placed to better confront their enemy.Image
Read 7 tweets
Feb 14
The U.S. military has been warning about this problem for over a decade and Ukraine just proved them right.

Area denial isn’t about winning ground. It’s about making movement impossible. 🧵 Image
Area denial, sometimes referred to as anti-access, is a common military tactic to control the access into and out of an area. Area denial is a particularly useful tool for irregular forces such as smaller special forces teams, guerrillas, and militias. The US military considers the adoption of area denial strategies by adversarial forces as, “[something] that may well be the most difficult operational challenge US forces will face over the coming decades.” While that quote may be from 2012 (JOAC 17 January 2012), it still rings true and can be seen in areas such as Ukraine where FPV drones create zones that units can only enter at their own peril. Area denial is a powerful tool in the strategic toolbox for units to make use of to help slow or fully stop the movement of enemy forces through an area. As usual, little disclaimer right here.

THIS IS NOT ADVICE TO GO DO ANYTHING ILLEGAL. DO NOT BREAK THE LAW. DO NOT CONSIDER BREAKING THE LAW. I DO NOT SUPPORT ANY EXTREMIST ORGANIZATIONS OR MOVEMENTS. I DO NOT SUPPORT ANY INSURRECTIONIST MOVEMENTS. I DO NOT ADVOCATE FOR ANY EXTREMIST ORGANIZATIONS, MOVEMENTS, OR IDEAOLOGIES. PLEASE DON’T DRONE STRIKE ME.Image
Key Principles.

Prior to getting into the various forms of area denial and how they are employed, the key ideas behind it need to be explained. Beginning with the economy of effort. That is to say, the goal of creating the greatest effect with the least amount of effort. If we want to stop an enemy in an area, you can position an army in an area but that requires men, supplies, logistics, weapons, and more that you have to take away from other areas. Instead, if you can leave behind a series of traps with only a handful of men, you maximize your defensive capabilities without having to throw piles of resources at the issue.

Area denial is also a very robust strategy that can be used in rural or urban environments, different strategies and tools can be employed in different environments. Whether the force is denying a road in a mountainous area or a series of fields in the flatlands of Iowa, area denial can be employed to great success.

Area denial strategies also synergize well with other common defensive measures and can create overall plans of defense that are iron clad despite having limited equipment or manpower. For example, making use of observation posts operating as an observer for an FPV unit or an ambush that triggers when an enemy unit triggers a trap. This allows the already amplified force to be multiplied by an even greater factor.

Finally, is the psychological impact that area denial tactics have. Creating a zone of alienation that units cannot enter lest they put themselves in peril creates a heavy sense of unease in the enemy, weakening their fighting spirit. Couple this with any losses gained in the area, it can force smaller sized units in the area to think twice about entering the area and overall hurt the morale of the enemy.Image
Read 11 tweets
Feb 12
🧵In a SHTF scenario, you won’t have air support or armor. You’ll have a few neighbors and a plan.

If that plan doesn’t include a dedicated Support by Fire element, you’ve already lost the initiative.

The math of the maneuver: 🧵 Image
Support by Fire

Mutual fire support is three words that can mean a lot of things. It encompasses any form of direct or indirect forms of fire support. It can come from artillery and mortars, naval guns, CAS, and drones. It also has another form that is less discussed, the art of support by fire (I stole that phrasing from an infantry magazine).

Support by fire is conducted by a maneuver force or unit wherein the goal is to physically observe the enemy and engage them with direct and indirect fires. For the purposes of this article, the focus will be primarily focused on direct fire as I have no knowledge of weapon systems such as javelins, Bradley IFVs, TOW missiles, or main battle tanks. Support by fire is best conducted by a separate team supporting a primary assaulting team but the battlespace can be very fluid and demanding on limited resources. Support by fire can be conducted either as a form of mutual support (elements assisting each other reciprocally) or as a standard form of support.

A support by fire mission can be a lifesaving operation for a unit that is either about to attack an enemy element or is actively defending against one.

As usual, little disclaimer right here. THIS IS NOT ADVICE TO GO DO ANYTHING ILLEGAL. DO NOT BREAK THE LAW. DO NOT CONSIDER BREAKING THE LAW. I DO NOT SUPPORT ANY EXTREMIST ORGANIZATIONS OR MOVEMENTS. I DO NOT SUPPORT ANY INSURRECTIONIST MOVEMENTS. I DO NOT ADVOCATE FOR ANY EXTREMIST ORGANIZATIONS, MOVEMENTS, OR IDEAOLOGIES. PLEASE DON’T DRONE STRIKE ME.Image
Recon and Preparation.

Prior to the actual engagement where the team will be employed, the team leader needs to perform a reconnoiter of the area where they will be supporting the attacking team. The leader needs to take things into account such as terrain, cover, concealment, sightlines, the enemy’s location, and the location of the team they are supporting. The team leader needs to weigh all of these factors to best identify where their team will set up to engage the enemy while ensuring their own ability to defend themselves.

Once the team leader has identified the location, they need to move their team up to the last piece of hard cover or concealment prior to reaching the point and have the team ready up. This is a good time for the team to cache any excess materials they may be carrying such as a heavy ruck or assault pack loaded with MREs.

Following this, the team must advance undetected to the point they will be supporting from. This is crucial because if the team is discovered, they risk falling under enemy fire and preventing their ability to conduct their support mission. Ideally, this means a low crawl. It sucks. It’s slow. It’s a hassle. But it is better than risking discovery.

Once the team has arrived, the team leader needs to determine the emplacement of their team elements. The calculus of this changes depending on the quantity and type of weapons systems and men at his disposal. If the team is setting up with an emplaced machine gun, things are different than say, three automatic riflemen and a guy with an M203. A team leader will employ the use of the dumbest acronym ever developed OKOCA (sometimes OCOKA, sometimes OCKAO, I have seen it in like 8 forms at this point lol) for this exact moment. OKOCA stands for O – observation and fields of fire, K – key terrain, O – obstacles, C – cover and concealment, and A – avenues of approach.Image
Read 11 tweets
Feb 9
🧵A lot of you are terminally blackpilled. You are doing exactly what they want.

The incessant and obscene messaging is rooted in a 70-year-old blueprint for breaking the human will, rooted in the Korean War.

Understand the mechanisms and break yourself and others free: Image
Modern social engineering is a very refined version of the Thought Reform techniques the Chinese pioneered during the Korean War.

In these camps, beatings and physical torture took second chair to mental anguish and group ostracization.

The same tools that were utilized to try and create human robots that would espouse Chinese communism over 70 years ago are still being utilized today to manipulate populations and society as a whole.

First, we need to establish the history of this procedure and what it initially entailed...Image
Thought Reform and Brainwashing During the Korean War.

After capturing US soldiers, the Chinese military interned these men into camps where they were focused on turning them into tools of the state. Soldiers that would admit to crimes they did not commit such as saying they used chemical or biological agents in the field to hurt the United States on the international stage. The theory also held that after returning them home, the soldiers would carry their new programming and spread it among the US, leading to a communist revolt such as the one conducted by Mao. There were 7 key aspects to the Chinese brainwashing program. They were as follows: milieu control, mystical manipulation, confession, self-sanctification through purity, loading the language, doctrine over person, and dispensing of existence. We will delve into each of these.Image
Read 19 tweets
Feb 7
🧵Most prepared citizens want to be fit.

Most people have no idea where to start.

Here’s the no-BS guide to getting there. 🧵 Image
Getting Fit:

It’s no surprise that most people in the US and Western civilization as a whole are not physically active enough. Many people are overweight, have little muscle endurance, and absolutely no cardiovascular ability. By not maintaining some basic level of physical fitness one is put at much higher risk for various health conditions such as heart disease, strokes, type 2 diabetes, and a number of cancers by up to 40% in some cases. From a more practical and less abstract approach, US Army data shows that soldiers with higher aerobic capacity and muscle endurance had less non-combat injuries in the field, as well as being more effective in their roles in the field.

From a prepping perspective, not being mildly to moderately fit puts yourself at a massive disadvantage and makes one a liability. Fitness means you can do the physical tasks such as walking home with a 30 pound get-home (bug out) bag, it means you can haul water from a body to your home for purification, it means you can cut up and remove the fallen tree after the tornado in your front yard, it means you can properly engage a potential threat if the fight lasts longer than a minute. Prepping is often thought of a “hobby” where you are just hoarding goods and items (something I have fought vehemently against and wrote 2 books because of it), as a byproduct of that mentality, the body is often neglected. Both from a medical perspective and a fitness perspective. Prepping is as much about “weathering the storm,” as it is about being able to effectively operate after it. You can’t be a basement shut-in forever.

Thankfully getting a basic level of fitness doesn’t require you to become a psychopath who lives in the gym and eats nothing but liver and chicken breast for ever meal. You can make minor adjustments that grow your abilities with TIME without even needing a gym membership! Americans tend to want to go hard and fast with things, expecting instant results, this is one of the many cases where that is not realistic. To become better we must slowly build ourselves up. The purpose of this piece is to help those who are just starting find initiative, assess their current abilities, build a weekly exercise regimen, and then stick to it. I also want to briefly touch on diet at the tail end of this.Image
Assessing Current Abilities.

Before determining what sort of exercise plan one is going to adhere to, they need to determine what their current abilities are. This unfortunately is a usually a very humbling experience and needs to happen. Without knowing what one’s limitations are, they risk injury, overtraining, or wasting time on an inappropriate plan.

Cardiovascular endurance can be tested in a high impact and low impact test, ideally one performs both. The high impact test begins with a 5 minute walk, then try to cover 1.5 miles as fast as one can without harming themselves. This does not mean push yourself beyond your limits and risk injury. If you need to stop or walk, that’s okay. After achieving 1.5 miles the time taken is noted and checked against a generic reference. If it takes less than 13 minutes, one is an above average point for a beginner, for between 13 and 16 minutes, that is a relatively average start point, and if it is longer than 16 minutes, they are below average (and that is okay!). The low impact test is a 6 minute walk on a flat surface and after 6 minutes the distance is noted, healthy adults often exceed 500 to 600 meters (~1600-1900 feet). Note all of this information for the next section and for goal planning.

Testing muscular strength likewise is a relatively quick process and does not require any specific equipment, bodyweight is a decent enough baseline. Begin with testing pushups, see how many you can do without breaking form. If you can’t even do one, try knee pushups, if you can’t do one, try against a wall! Then try squats, perform as many as you can in one set. Then try a pull up if you have a pull-up bar (very cheap online and cheaper if bought used), if you cannot do one, try a flexed arm hang, if you can’t do longer than a second, note it. Finally try a forearm plank and hold it as long as you can with good form. Note all of this information for the next section and for goal planning.

You can also test your mobility and flexibility with a sit and reach test where you sit flat on the ground, legs extended, knees straight, and reach forward. Not being able to reach past your toes is generally regarded as a negative score and is something to work on.Image
Read 9 tweets
Feb 7
If your buddy took a GSW RIGHT NOW—could you actually keep them alive until help arrived? Or would your lack of basic combat medicine skills get them killed? 🧵

Combat medicine saves lives yet many shooters have no idea how to do it in a calm setting, much less under pressure... Image
Quick disclaimer. I AM NOT A DOCTOR. THIS IS NOT MEDICAL ADVICE. SEEK ALL MEDICAL TREATMENT FROM A PROFESSIONAL! This article provides basic educational information only and does not substitute professional medical training or advice. Always seek proper medical training from qualified instructors. The author is not liable for any actions taken based on the information provided.
Basic Combat Medicine for the Every(rifle)man

Combat medicine is a topic that is rarely discussed despite it being lifesaving at its core. It is often ignored or forgotten in favor of trusting that a medic will be nearby when the unthinkable happens. Unfortunately, that isn’t always the case and sometimes the basic actions taken by non-medical teammates can save the life of someone in dire need. Thankfully in recent years tourniquets have clamped their way down into the zeitgeist but as we’ll discuss, there are other basic measures that should be known, understood, and practiced by the average rifleman so they have the skills to save the lives of their comrades or even themselves.Image
Read 12 tweets

Did Thread Reader help you today?

Support us! We are indie developers!


This site is made by just two indie developers on a laptop doing marketing, support and development! Read more about the story.

Become a Premium Member ($3/month or $30/year) and get exclusive features!

Become Premium

Don't want to be a Premium member but still want to support us?

Make a small donation by buying us coffee ($5) or help with server cost ($10)

Donate via Paypal

Or Donate anonymously using crypto!

Ethereum

0xfe58350B80634f60Fa6Dc149a72b4DFbc17D341E copy

Bitcoin

3ATGMxNzCUFzxpMCHL5sWSt4DVtS8UqXpi copy

Thank you for your support!

Follow Us!

:(