Discover and read the best of Twitter Threads about #Whatsminer
Most recents (2)
A thread on if #BTC #mining is for you. I mine through @compass_mining and can provide real world averages on TH/s numbers with downtimes, electricity outages, pool fees, maintenance, etc.
With my machines, I use @f2pool_official and average .00000483 #bitcoin per each TH/s per day. So a 96 TH/s machine averages .00046363 BTC per machine per day. A 100 TH/s machine averages .000483 BTC per machine per day.
If you started mining on August 1, 2022 with a 110 Th/s machine (taking into account an estimated May 4, 2024 halving), it would take 3123 days to mine 1 bitcoin. 8.77 years. 105.24 months.
*my model does NOT take into account future increases in network difficulty.
*my model does NOT take into account future increases in network difficulty.
Sometimes I was asked how to choose used #whatsminer mining rigs. Here I listed FOUR points FYI 👀
1️⃣Aging test twice because restart once is required. When the machine runs to the standard hashrate, run another half an hour and then restart to see if everything is ok.
1️⃣Aging test twice because restart once is required. When the machine runs to the standard hashrate, run another half an hour and then restart to see if everything is ok.
2️⃣Check the previous miner log to see if there was an error code of hashrate board or power failure. If there is no miner log, then it is better to know the reason.
3️⃣ It is better to confirm the hashrate by testing rather than see the SN label only. Besides, check the label info of the hashboard via #whatsminer tool. Remember that the PCB info of the three boards is different but the BIN info of the three boards is the same.
