Discover and read the best of Twitter Threads about #hamspirit
Most recents (2)
Heute nacht 02:20. Beim Testen eines restaurierten antiken Siemens TRX stolpert @oe3wyc auf der maritimen Notruffrequenz 2182 KHz über diesen Mayday Call. Die mit Schiffbrüchigen überladene #OceanViking ruft Malta Radio 1/2
"MV #OceanViking bittet Malta Radio in der Nähe des Hafens Schutz suchen zu dürfen. Keine Antwort von Malta Radio. Tonqualität schauderhaft weil auf die Schnelle mit dem Handy recorded. 2/3
@OE3WYC: "Jeder Funker mit Anstand hätte zumindest den Call beantwortet!". Wer von uns Funkamateuren nämlich einen solchen Notruf hört und ignoriert, verliert die Lizenz, wenn das nachweisbar ist. Das sind Berufsfunker, da gilt das erst recht.
Found the time to upload the Universal - Helix - Holder to @thingiverse
thingiverse.com/thing:3903285
If you have questions, ask here or email me. NO answers on thingiverse!
Please post your makes.
Hope you enjoy it.
Your interest is my motivation
#hamradio #qo100 #hamspirit
thingiverse.com/thing:3903285
If you have questions, ask here or email me. NO answers on thingiverse!
Please post your makes.
Hope you enjoy it.
Your interest is my motivation
#hamradio #qo100 #hamspirit
Also uploaded the screw demonstration to @YouTube :
Thanks for sharing @ retweet this
There are so many printers out there and OMs waiting for a solution and have no idea about this one
@AMSAT @amsatdl @qo100_sat @QRZnow @AntennaP0rn @qrz #3Dprinting
Thanks for sharing @ retweet this
There are so many printers out there and OMs waiting for a solution and have no idea about this one
@AMSAT @amsatdl @qo100_sat @QRZnow @AntennaP0rn @qrz #3Dprinting
@YouTube @AMSAT @amsatdl @qo100_sat @QRZnow @AntennaP0rn @qrz Also uploaded the helix bend helper within this universal holder @thingiverse
If you need only the helper, also fine.
Its for ~3.5mm wire (10mm²) - 30mm distance between windings - maximum 6 turns - diameter ~40mm
If you need a different, let me know.
Thanks for interest
If you need only the helper, also fine.
Its for ~3.5mm wire (10mm²) - 30mm distance between windings - maximum 6 turns - diameter ~40mm
If you need a different, let me know.
Thanks for interest
