Kannan Gopinathan Profile picture
Jun 5, 2021 8 tweets 8 min read Read on X
@irah777 @OpIndia_com @BefittingFacts A lot of false equivalences. To begin with this one.

1. The VVPAT that sits in the middle is an active device and one which was connected to an external device like SLU or laptop for symbol loading unlike the BU which was an electromechanical device.
@irah777 @OpIndia_com @BefittingFacts Another erroneous assumption on both counts.

1. There is no active verification at the time of voting as irrespective of whether voter has seen the vote or not, the printed slip falls down & gets stored.

2. VVPAT auditing (not verification) during counting is less than 2%.
@irah777 @OpIndia_com @BefittingFacts Another false equivalence of VVPAT as printers.

No computer connects its keyboard to CPU through a printer. If that is done, then having access to printers would be sufficient to raise alarms

Here data from input device (BU) comes to CU through this so called printer (VVPAT)!
@irah777 @OpIndia_com @BefittingFacts Here he says it is "most likely" designed around ASIC and hence we should just remove all doubts of hacking!!

I mean, that is not how system security works.

Either you give full details of the design and claim this is why it cannot be tampered with or you raise questions.
@irah777 @OpIndia_com @BefittingFacts Another wrong equivalence.

It is not just about whether it is connected to an external device or not. But equally about when it is connected.

Symbol loading to VVPATs happen after
1. date of polls known
2. sequence of candidates known
3. allocation of booths to EVMs known.
@irah777 @OpIndia_com @BefittingFacts Another erroneous assumption. BUs simply passed the signal (Votes).

VVPATs store it & send it to CU only after VVPAT paper slip is printed.

You can try this out by switching off the VVPAT immediately after vote is cast in the next election. CU won't register any vote. :)
@irah777 @OpIndia_com @BefittingFacts "It doesn't look like designers would have compromised... or such eminent designers won't do this" is not a comforting argument. Considering the amount of jugaad that is built into the VVPAT machine, there are more questions to be asked to the designers.
@irah777 @OpIndia_com @BefittingFacts If you are seriously interested in understanding why I asked those questions, I would like you to read the below article. theindiaforum.in/article/vulner…

• • •

Missing some Tweet in this thread? You can try to force a refresh
 

Keep Current with Kannan Gopinathan

Kannan Gopinathan Profile picture

Stay in touch and get notified when new unrolls are available from this author!

Read all threads

This Thread may be Removed Anytime!

PDF

Twitter may remove this content at anytime! Save it as PDF for later use!

Try unrolling a thread yourself!

how to unroll video
  1. Follow @ThreadReaderApp to mention us!

  2. From a Twitter thread mention us with a keyword "unroll"
@threadreaderapp unroll

Practice here first or read more on our help page!

More from @naukarshah

Jul 12
AI171 Crash - Caused by a catastrophic & continuing oversight from FAA & DGCA?

The preliminary investigation report points to glaring regulatory failures.

Before jumping on to sabotage theories, a thread on the questions that demand answers: NM-18-33 : Boeing 717, 737, 747, 757, 767, 787, MD-11 and MD-90 Aeroplanes - Fuel Control Switch Locking
Preliminary Investigation Report VT ANB
2018: FAA issued SAIB NM-18-33 after Boeing received reports from 737 operators that fuel control switches were INSTALLED with locking features disengaged.

When disengaged, switches can move from RUN to CUTOFF without pilot lifting action => immediate in-flight engine shutdown. Image
Image
Based on these reports, FAA recommended that operators inspect fuel control switch locking - if switch moves between positions without lifting, locking is disengaged and switch must be replaced immediately.

Simple test, but a critical fix. Image
Read 10 tweets
Jan 3
Delivery partners pay a very high tax for being partners and not employees!

For the meagre income they make, they effectively pay an 18% GST on their earnings via Reverse Charge Mechanism (RCM). 1/
Unlike income tax, where most gig workers would be exempt considering their limited income, this GST via RCM is baked into the system, eating into their already slim margins. 2/
Adding to the burden, gig workers or delivery partners can't claim Input Tax Credit (ITC) on essential expenses like vehicle purchase, maintenance, insurance or other business related expenses due to the Reverse Charge Mechanism, further reducing their net income.
Read 6 tweets
Jun 11, 2021
Dear PM @narendramodi, after the surprise incursion from China last summer & the Galwan valley incident, I have been trying to understand China, by studying their history, culture, language etc.

I am no China expert. But here is two cents on why they did what they did. 1/n
As with India, China also should be studied based on its current position in its civilisational and historic journey.

And in that journey, there is not a more important theme than this theme of "Unification of China" 2/n
Unification phase and disintegration phase is a repeated pattern in Chinese history.

Hence it becomes important to understand which phase they view themselves to be in, in the present.

And in their collective imagination, this is very clearly a unification phase. 3/n
Read 22 tweets
Jun 4, 2021
Some of you might be aware of my curiosity driven project : whatchinareads.com.

Today, I added Science related news section to the website and I came to know that a Chinese academician has applied for emergency use of nebulized inhaled covid vaccine. 1/n
Also added another section for academic papers abstracts.

A mine-field of information for those who are interested in the field. Only abstracts though. Those really interested will still have to go to the original site and get the full paper PDFs 2/n
An astonishing thing is the number of papers that are on industrial and manufacturing technology.

One paper is titled

"Practical analysis of 3D printing technology in underwear design." whatchinareads.com/article.php?ar… 3/n
Read 5 tweets
Apr 25, 2021
Dear PM @narendramodi, nothing much to say.

I am sure you must be feeling bad that Govt did not do enough in the past one year to prepare.

But please realize that it is still not late for many districts since they are not yet severely affected.

Do focus there as well. 1/n
Apart from the team that is dealing with the ongoing full-blown crisis in many places, please create another team to focus on the districts that are yet to be as severely affected.

Start preparation in those districts also on war footing. 2/n
I don’t want to burden you with any new suggestions or sermons dear PM @narendramodi.

But would like to share some screenshots of the suggestions/requests that were posted last year during the lockdown. 3/n
Read 9 tweets
Mar 31, 2021
We are connecting an external device to EVM-VVPAT

a) after announcement of election date
b) after publication of candidate list
c) after both stages of randomisation.

No more stand-alone, no more a calculator & none of the process safeguards are effective anymore. @ECISVEEP
For a slightly detailed take, please watch

For a more detailed take, please watch (10' onwards)

Read 5 tweets

Did Thread Reader help you today?

Support us! We are indie developers!


This site is made by just two indie developers on a laptop doing marketing, support and development! Read more about the story.

Become a Premium Member ($3/month or $30/year) and get exclusive features!

Become Premium

Don't want to be a Premium member but still want to support us?

Make a small donation by buying us coffee ($5) or help with server cost ($10)

Donate via Paypal

Or Donate anonymously using crypto!

Ethereum

0xfe58350B80634f60Fa6Dc149a72b4DFbc17D341E copy

Bitcoin

3ATGMxNzCUFzxpMCHL5sWSt4DVtS8UqXpi copy

Thank you for your support!

Follow Us!

:(