Patrick Chovanec Profile picture
Jul 13, 2021 42 tweets 13 min read Read on X
Today in Microsoft Flight Sim, I'm off to the interior of Brazil to fly the Embraer EMB200 Ipanema, and explore the surprisingly fascinating world of crop dusters.
If this airplane looks familiar, that's because it was the model for Dusty Crophopper in the movie Planes.
Well, technically Dusty is an Air Tractor AT-502, manufactured in Texas not Brazil, but the EMB200 is a virtually identical airplane.
The small airstrip I'm at is Fazenda Poruina (SJHH) in the western part of Goias Province. It's basically a farm, in a area well known for growing soybeans.
So first let's just look at the cockpit. It's a one-seater, controlled by a center stick. There's a prominent GPS in the center of the panel, whose purpose I'll explain once we're airborne.
The throttle and mixture controls are on the left, so you fly with your right. This particular Brazilian model has a fixed propeller, but some of these same planes in the US have not only a constant speed propeller, but also a turboprop engine.
In our case, our EMB200 has a 6-cylinder 260hp piston engine.
Behind the engine, and directly in front of the cockpit, covered by a brown hatch, is the hopper - the container for the (normally liquid) chemical to be sprayed on the crops.
And you can see that we are loading the chemicals onto the plane right now by hose, before takeoff.
The "dry" loading valve, designed to protect against leakage, conducts the chemicals to the hopper.
When we're airborne and it's time to spray the chemicals onto the fields, this fan - turned by the airstream - generates the pressure to pump them out of the hopper.
The chemical is pumped through pipes out along the booms under the wings, where it is release from these valves.
You'll see, it's going to be pretty cool. The hopper is loaded, I've started the engine, and I'm now making the world's shortest taxi ...
About five feet the to the start of the runway, which is a dirt path about as wide as the airplane itself, bordered with barbed wire fence on either side. At least I have a headwind.
I am keenly aware this is a tailwheel that is going to want to veer off center the moment the tail lifts, and I don't have a lot of room to veer anywhere without taking out some pickets.
But a few sharp kicks of the rudder and I somehow stayed centered, and got off the ground.
The province of Goiás lies west of the inland capital of Brasilia, which was constructed in 1960. I actually rented a car from Brasilia a few years ago and drove out into a countryside just like this.
Passing back over the dirt airfield and the small farm next to it.
So I'm looking around wondering where all the soybeans are that I'm supposed to spray, because this looks like the scrub brush terrain I remember, pocked with red clay termite mounds.
It takes a little while, flying west towards the border with Matto Grosso dul Sul province, but I've found plenty of soybeans ahead.
Ok, I'm going to be upfront right now and tell you this is NOT how you dust crops. In the real world, you fly about 2 feet off the ground, at 150mph, with your wheels almost touching.
But there is absolutely no way I can do that in MSFS, jump out of the cockpit to take an external screenshot, and hop back in without crashing the plane. So this is just to demonstrate what the crop-spraying effect looks like.
This is what it looks like in real life. It's impressive, and worth a watch.
All the time they're using the GPS screen to fly a programmed pattern, like a tractor or a harvester, up one row, turn, then down the next, like painting with a brush to spray the whole field.
You might be surprised to learn that there are around 2,700 licensed crop dusting ("agricultural aviation") pilots in the US. I don't have figures for Brazil, but with all their soybeans, I bet it can't be far off.
Why use planes? After heavy rains, fields aren't always accessible to ground machinery. Also, it's quicker, especially for crops like soybeans that require a lot of otherwise time-consuming chemical treatments to stay healthy and maximize yields.
Because crop dusters must operate so close to the ground, pilots require a special license that allows them to ignore the normal minimum altitude rules (1,000 feet in congested areas, 500 feet outside).
A crop dusting pilot in the US will typically work four months of year (summer) every day from day till dusk, getting paid by the acre. In that period, they might earn $60-80,000, and have the rest of the year to rest or hold another job.
In just the past few years, Brazil has surpassed the US in soybean production, mainly centered in this central inland region of Goiás and Mato Grosso.
A growing portion of Brazil's crop is exported, particularly to China.
Since the 1970s, large swathes of what were once forests have been cut down in inland Brazil to grow soybeans. It's both a vital economic resource and a subject of great controversy.
To conserve resources - and save money - the EMB200 was designed to run completely on ethanol as fuel.
Here's a good video summary of the global forces driving soybean production in Brazil, and its implications:
As I pass westward over the border with Mato Grosso do Sul, there's soybeans as far as the eye can see - and a little more spraying to do (why not?)
I'm approaching the town of Costa Rica, which has a paved airport ahead for me to land.
On left downwind to land at Costa Rica.
The approach speeds are very similar to a Cessna 172, but I'm fighting a stiff crosswind from the left.
Landing any tailwheeler in a crosswind is tricky. I didn't ground loop, but in the process of kicking the rudder to avoid ground looping, I ended up in the grass.
Taxiing up to refuel.
Hope you enjoyed a little glimpse of Brazil, as well as the world of crop dusting.
I couldn't resist this at the end. Look, it's Dusty and Skipper.
An interesting video on whether drones will replace manned crop dusters:

• • •

Missing some Tweet in this thread? You can try to force a refresh
 

Keep Current with Patrick Chovanec

Patrick Chovanec Profile picture

Stay in touch and get notified when new unrolls are available from this author!

Read all threads

This Thread may be Removed Anytime!

PDF

Twitter may remove this content at anytime! Save it as PDF for later use!

Try unrolling a thread yourself!

how to unroll video
  1. Follow @ThreadReaderApp to mention us!

  2. From a Twitter thread mention us with a keyword "unroll"
@threadreaderapp unroll

Practice here first or read more on our help page!

More from @prchovanec

Nov 7, 2024
I no longer feel like I belong in this country. On a deeply personal level, its values are no longer my values, as they once were. My persistence in it feels increasingly strange and unwelcome.
This is not some angry declaration. The feeling perplexes me, more than anything else.
I say this as someone who served in the military, worked in politics, and spoke proudly and fondly of our country while living abroad.
Read 5 tweets
Nov 6, 2024
Well, so it has come to pass. I cannot say I am surprised, because I did see it coming, but it is saddening nonetheless. I will not say much, because I don't trust myself to. But I do think this nation has made a grave mistake. How grave, we shall only learn in time.
This is not the country that I spent a lifetime, at home and abroad, loving and defending. It is something else, and what exactly that means for me I cannot yet say.
I'm cautious about sayihg what I really feel right now, especially on this platform, because I know it would be mocked. And that, itself, is a symptom of what I see, the glee that many now take in other Americans' sadness and fear. We are remaking ourselves in his image.
Read 5 tweets
Oct 29, 2024
Then you're a fool. We have a democratic republic. I've been a limited-government conservative Republican my whole life. In fact, some of my major criticisms of Trump are that he is too much a big-government interventionist in the economy.
This inanity about "the US is not a democracy, it's a republic" is getting way too prevalent. The US has a republican form of government - as does China and North Korea. Unlike them, it is democratic in that it derives its authority from the consent of the governed.
"The US is not a democracy, it's a republic" is a line that comes from the old John Birch Society (which was drummed out of the mainstream Republican Party because of its extreme conspiratorial views) based on a very ignorant reading of how the Founders used the term democracy.
Read 6 tweets
Oct 25, 2024
If Musk tried to withhold Starlink services to aid a Chinese invasion of Taiwan, our Defense Dept should sit him down and tell him he going to restore it or the U.S. government is appropriating the company in the interests of national security. Full stop.
I’m usually for the U.S. government taking a hands-off approach to business, but we’re talking about a wartime scenario that would almost certainly involve the U.S. in a peer-to-peer conflict and there’d be no room for fooling around.
And quite frankly if he was having conversations with any adversary country about it that would be very problematic in and of itself.
Read 6 tweets
Sep 11, 2024
1. There are times when a thread makes so many important mistakes and feeds into so many misconceptions that it's worthwhile to address it point by point. My apologies.
2. It is true that Trump's tariffs against China were ostensibly imposed for the purpose of forcing China to alter it own unfair trade practices - in large part because the President's legal authority to levy special tariffs requires him to cite this as the reason.
3. However, it was unclear from the start what the "ask" was from China - what exactly the Trump Admin wanted China to do that would allow the tariffs to be lifted. And Trump repeatedly talked about tariffs being good and beneficial in their own right.
Read 20 tweets
Jul 27, 2024
This is a fundamental misunderstanding of the problem. As someone who used to analyze and “summarize” these bills for Congress, let me explain …
The reason the bills are “mammoth” is that they includes hundreds, even thousands of legislative changes on a wide variety of unrelated topics. Basically a “bill of bills”.
Where AI could help us by offering some context to what these often small changes actually mean, in terms of policy. Often it’s hard to understand what changing “and” to “or” in Clause 81 of Title II refers to or the impact it could have.
Read 6 tweets

Did Thread Reader help you today?

Support us! We are indie developers!


This site is made by just two indie developers on a laptop doing marketing, support and development! Read more about the story.

Become a Premium Member ($3/month or $30/year) and get exclusive features!

Become Premium

Don't want to be a Premium member but still want to support us?

Make a small donation by buying us coffee ($5) or help with server cost ($10)

Donate via Paypal

Or Donate anonymously using crypto!

Ethereum

0xfe58350B80634f60Fa6Dc149a72b4DFbc17D341E copy

Bitcoin

3ATGMxNzCUFzxpMCHL5sWSt4DVtS8UqXpi copy

Thank you for your support!

Follow Us!

:(