What happens in your country when the Russian world comes. These are the Georgian villages in the occupied Tskhinvali region (AKA south ossetia). Russians have totally eliminated these Georgian settlements.
Kurta village BEFORE - AFTER #RussianWarCrimes#PutinHitler
🧵 1/
Dzartsemi village
BEFORE - AFTER. 2/
Wanat village
BEFORE - AFTER 3/
Disevi village
BEFORE - AFTER 4/
Beloti village
BEFORE - AFTER 5/
Awnew village
BEFORE - AFTER 6/
And this is not all, there are dozen of villages which physically no longer exist. They destroying the Georgian heritage in the occupied region.
7/
Russians destroy Georgian churches or erase Georgian icons and paint Russian ones. They are trying to destroy the whole Georgian heritage/footprint in the region.
8/
Russians aren't christians, they are just orc horde, they don't respect nothing.
9/
• • •
Missing some Tweet in this thread? You can try to
force a refresh
Ukraine's operational command says "cruise and ballistic missile strikes are underway at the control centres in Kyiv".
Map if the Russian attacks!!! #russia404
Kharkiv 4/
Announced about landing operation in Azov sea. Purpose to open the corridor to Odessa and Pridnestria.
5/
As I said yesterday, the russian army assault started this night.
MLRS salwo. #russia404
Missile strike to the city of Mariupol. #russia404
Ukraine's operational command says "cruise and ballistic missile strikes are underway at the control centres in Kyiv".
Map if the Russian attacks!!! #russia404
Field of view of the 1A40 sighting complex. 1. FoV from manual 2. FoV real
3 and 4. 1A40 1/
The "Ballistic Computer" of the 1A40 is this two Nomograms in right side of the gunner.
In the left one we find the correction "Sigma 0", in the right one the "Sigma M", then we add them up and enter the result into the sight using the Potentiometer (in red circle). 2/
EG.
Left:
- Charge temperature is -20°C, barrel bore wear - 0.5 mm. "Sigma 0" will be + 1.8%.
Right:
- Atmospheric pressure is 650 mm Hg., air temperature is -20°C, "sigma M" is -1.8%.
- 1.8 + (- 1.8) = 0%. This means that the correction potentiometer should not be touched.