Craig Scarborough Profile picture
Jul 20, 2022 9 tweets 10 min read Read on X
More #BritishGP spec deep dives
@WilliamsRacing FW44 (long sidepod version)
#F1 #TechTalk ImageImageImage
Cockpit details, drivers seat (Latifi), removable panel houses the @F1 360 camera and the @EMMotorsport GPS unit.
#F1 #TechTalk ImageImage
Repackaged coolers in the sidepods and above the engine were a key part of the Silverstone upgrade.
#F1 #TechTalk ImageImage
As well as sidepods, the floor edge was revised.
#F1 #BritishGP ImageImageImageImage
Pressure sensors were fitted to check the new aero.
#F1 #TechTalk Image
Floor inlet and fences, tunnel roof lowers towards the outboard side.
#F1 #TechTalk ImageImageImage
As well all that, there's added cockpit side aero
#F1 #TechTalk ImageImageImage
Gearbox comes from Mercedes for the first time. @BremboBrakes
#F1 #TechTalk ImageImage
Tea tray support follows old practice in being a simple carbon beam, without stays or springs
#F1 #TechTalk Image

• • •

Missing some Tweet in this thread? You can try to force a refresh
 

Keep Current with Craig Scarborough

Craig Scarborough Profile picture

Stay in touch and get notified when new unrolls are available from this author!

Read all threads

This Thread may be Removed Anytime!

PDF

Twitter may remove this content at anytime! Save it as PDF for later use!

Try unrolling a thread yourself!

how to unroll video
  1. Follow @ThreadReaderApp to mention us!

  2. From a Twitter thread mention us with a keyword "unroll"
@threadreaderapp unroll

Practice here first or read more on our help page!

More from @ScarbsTech

Mar 25
Some analysis into the #MV33 brake failure & fire at the #AustralianGP.
RBR said the right rear caliper was stuck on, which would have been detectable by pressure sensors.
So, it wasn't a blocked brake duct (my initial guess).
thread....
#F1 #F1Tech
📸 F1TV
Image
Image
The heat from the brake being constantly on, set the brake duct on fire.
However, the brake disc did not explode when entering the pits. As the disc was still visible & intact in the pits.
The blast was probably the wheel/tyre failing releasing the air & blowing debris everywhere
Image
Image
So, where does the brake system split to isolate the RR caliper and what parts might be responsible?
The brake system is split front and rear.
The front shares the same pedal and tandem master cylinder with the rear, so we can exclude those parts. Image
Read 7 tweets
Nov 29, 2023
It's been exactly 3 years since Romain Grosjean's huge accident in Bahrain.
The monocoque was on at the @F1Exhibition in Madrid this summer.
I took some time to look over the tub and noted the damage, which included elements I wasnt aware of...
#F1 #F1Tech
Thread....


Image
Image
Image
Image
Summarising the crash
The car went intact into the barriers at 197kph, at an angle on it's right hand side. This was the biggest deceleration, 67g.
The car jammed in the barrier and flicked around to the left, breaking apart in doing so, the survival cell remaining in the barrier Image
2)With the initial frontal hit to the barriers, the nose box wasnt evident on the car or track in the post crash pics.
But some of the nose is still attached to the right, but little remains on the left.
Most of the length of the nose appears to be used in absorbing the impact.

Image
Image
Image
Read 11 tweets
Jun 17, 2023
Williams are another team bringing a big update to their car.
The FW45 has had a thorough aero review, with one set of bodywork readied for #AA22 at the #CanadianGP.
#F1 #F1Tech ImageImage
The floor is the key change. Mostly the underside, but the inlet fences, floor edge and diffuser are more visible changes. The rear brake ducts are reworked accordingly.
#F1 #F1Tech ImageImage
Also the sidepods, feature new inlets and a deeper scallop to the waterslide. Directing more flow to the diffuser.
#F1 #F1Tech ImageImageImageImage
Read 6 tweets
Jun 17, 2023
The first big update to the AMR23.
Heavily revised sidepods, floor edge and cooling outlets.
#F1 #F1Tech #CanadaGP ImageImageImageImage
The waterslide is narrowed and starts with a distinct edge. This may be to contain the rotating airflow, which marries up with the revised undercut, to create more load over the diffuser.
#F1 #F1Tech #CanadaGP ImageImage
The undercut feeds into the floor edge further back and with more more load.
The floor edge has been revised, but not in a substantially different way.
The rear tyre temperature sensor is embedded in the floor (red)
#F1 #F1Tech #CanadaGP Image
Read 5 tweets
Apr 1, 2023
Corner entry deceleration issues for RBR persist.
#F1 cars 'brake' in several ways. There's the hydraulic brakes, hybrid braking and engine braking. All affect how the car slows & rotates into a turn. From inputs at the pedals, calculated by the ECU.
#F1Tech #AustralianGP
Simply lifting off the throttle gives engine braking. This map can be varied from the steering wheel button (EB or Torque). Altering the throttle/fuelling at that moment.
More EB (up to a point) gives stability/understeer. Less EB gives more rotation.
Confusing things more are the differential settings, that gave a similar balancing effect on corner entry.
Read 5 tweets
Apr 1, 2023
Speaking to guests after #AustralianGP Quali, Lawrence Stroll revealed part of the reason for AMR's pace & why LS was a little slower than FA, but much closer today
The bulged sidepods are driven by exhaust vibrations to ease boundary later build up over and the car
#F1 #f1tech
Boundary layer is a phenomena where there's a layer of air stuck to the car. Over long surfaces it builds up & upsets the aero.
AMR tech director Dan Fallows discovered at Red Bull, during the exhaust blown diffuser era, that vibrating the bodywork reduces this. As used on planes
So, the large sidepod flanks are built internally, to be vibrated by the exhausts, not using the exhast gasses, just their movement
The large flanks to the sidepods each house a large internal volume called the 'Resonant Tank'. This shakes the waterslide tunnel and the underfloor
Read 5 tweets

Did Thread Reader help you today?

Support us! We are indie developers!


This site is made by just two indie developers on a laptop doing marketing, support and development! Read more about the story.

Become a Premium Member ($3/month or $30/year) and get exclusive features!

Become Premium

Don't want to be a Premium member but still want to support us?

Make a small donation by buying us coffee ($5) or help with server cost ($10)

Donate via Paypal

Or Donate anonymously using crypto!

Ethereum

0xfe58350B80634f60Fa6Dc149a72b4DFbc17D341E copy

Bitcoin

3ATGMxNzCUFzxpMCHL5sWSt4DVtS8UqXpi copy

Thank you for your support!

Follow Us!

:(