This thread goes over the majority for PD arrays that I suggest you master (most important ones first)
A PD array is a type of ICT entry. There are lots. First I will show them and say how to use them, then show how to put them all together.
Study💎🧵
1. Fair Value Gap (anytime when a low of first candle does not overlap high of a third candle in a sequence)
Best way to use a fair value gap is…
Longing a FVG if it is in discount (under 0.5) on a market structure shift to the upside
OR
Shorting a besrish fair value gap in premium (above 0.5) if we break structure to downside)
All other FVGs are irrelevant (for now)
2. Orderblock (OB)
Bullish OB is a set of green candles before up move in an UPTREND
Bearish OB is a set of 1 red candle before down move in a DOWNTREND
Everyone uses these differently.
I suggest marking out order blocks on the higher timeframe such as 15M 1H or 4 hour, then once we arrive to one, go to the lower time frame like the 1m or 5m to see if we get a setup off of it
Like this:
You can also use order blocks for stop loss placements like this:
Place stop above bearish order block if you are short and below bullish order block if you are long
3. Balanced Price Range
This is when a Bearish FVG and Bullish FVG line up, there’s more to this but don’t want to take the time to over explain in this thread
Here’s unbalanced versus a balanced price range:
4. Breaker Block
To put this in the simplest terms as possible so you understand:
Look for an orderblock that was broken through after we purged liquidity.
*Breaker Blocks are not old OBs, because the OB should not be respected in the first place*
This is a breaker block.
5. Mitigation Block
This is the same thing as a breaker except we do not purge liquidity before.
Like this:
6. Treat volume imbalances like a Fair Value Gap.
Like this:
7. Wick / Rejection Block (credit to Lucius)
I don’t use these a ton, but if you ever see giant wicks at bottom or tops of trend when taking liquidity, draw a fib with the 0.5 on the whole wick alone.
Then you look for a setup off of it.
Like this:
8. Propulsion Block (Credit to Lucius)
This is basically when we get an OB, then a second OB off the first OB. The second OB is a propulsion block and you do not want us to retrace below the mean threshold of it (50%)
Like this:
9. New Week Opening Gap (NWOG)
These act as magnets. I always draw the 50% (CE) of NWOG and what I do is if I see we are in a sell model and there’s sellside below, I often look to see if there’s a NWOG under
If there is, that’s my target after sellside, then I look for potential reversal off of it.
Like so
10. This is a hidden fair value gap. You treat this just like a normal fair value gap.
Like this:
11. NDOG: Same thing as NWOG
(Although I believe NWOG holds more weight)
Alright, now note all these PD arrays
You can also use all of these as inverses. (besides OB because that’s just a BB/MB)
So once we close above old bearish FVG you look for a long setup off it and want to see it used as support
This just doubled the PD arrays you can use:)
HOW TO COMBINE THEM
ICT once said “If 3 PD Arrays fail, you’re fucked”
So if I see a FVG combined with an OB and VI, like this picture, and we break through all 3:
That likely means my bias will change for the time being
This is why you should know all PD arrays
That’s it. There are a few more but these are the most common ones you should use every single day and the only ones I really use.
Check out my discord if you have questions or want to talk with other good ICT trader during the day:)
Here is my discord if you have any questions I will answer: discord.gg/rBEHxWcN
I also live trade everyday for $15 a month if you’re interested but just ask me about that in discord
For my BPR experts I know this is an inversion FVG lol
SORRY GUYS THE ANNOTATION IS CORRECT HERE
Read the picture. Green candle before down move = bearish OB in a downtrend while order flow is bearish
Red candle before up move = bullish OB in an uptrend while orderflow is bullish
i typed this out earlier after a tough tennis match and should’ve rechecked everything when mindset was better but posted anyways
i will do a whole separate orderblock thread anyways so be prepared
• • •
Missing some Tweet in this thread? You can try to
force a refresh
If you can sit and wait for this setup with 3+ equal highs on any time frame [M1+] 99% of the time we will go back and hit the equal highs (same with EQL)
You must wait until you get a setup to them and adjust RR accordingly
On the 1 minute, the equal highs must be formed anytime after 8:30 and before 4:00 to have the highest probability of working
Same with equal lows
I want someone to go backtest this and prove me wrong please
If you are struggling with bias, see which FVGs on the higher time frame get traded through (with a close above/below) and then see what happens after.
Backtest it🧠👁️
This means you will miss some of the move but there’s still time to get in before we purge liquidity
Example from last week, when we traded and price closed over this fvg after this wicky candle, that tells me as long as the fvg we traded through holds, we will hit some of BSL. So you just wait for a long setup after we CLOSE above not just a wick
All these scalps/plays are using variations of the models I posted with SIBIs, BISIs, volume Imbalances, even an inverse breaker block
I know it’s demo but having the ability to read price every move is insane. Beach time now. NFP tomorrow, no live trades:)
95% of you probably have no idea what that other shit is I mentioned. There’s more to ICT than a FVG. Reading the charts is like art to me now and it didn’t come for a while. Starting to come more and more to me after a year
I suggest printing these out and putting them on your desk or something. It’s nice to see them side by side with the framework you are looking for live time
Model 1 just played out live time after this tweet:)
THIS THREAD SHOWS YOU WHEN NOT TO TAKE A FAIR VALUE GAP (FVG).
This will help you so much if you are new at ICT, I promise.
After the 5 examples there will be a quiz. Don’t look at the next tweet during quiz and try to test yourself whether you would long/short the FVG
Example 1:
This fair value gap fails because we hit the low. Never take a bearish fair value gap after we hit sellside liquidity. It occasionally works but is not what ICT teaches
Example 2:
This fair value gap fails because we have equal highs above. The market loves targeting these clean equal highs because it looks like clean resistance to retail traders.
Don’t short with equal highs above. It works sometimes, but not more than 20-30% of the time!