derek guy Profile picture
Jan 11 12 tweets 6 min read Read on X
Which suit looks better to you? I will let you mull on it for a while and then give some of my thoughts below. 🧵 Image
In the last 20 years, suits have become slimmer and shorter as a counter-reaction to the billowing, oversized Armani suits of the 1980s and '90s. This can look fine on certain body types, but more often, it does not look very flattering.
Image
Image
Here, we see Macron in a toned-down version of that look—updated, but not overly fashionable—and Henri, the Grand Duke of Luxembourg, in a more classic cut.

Macron is wearing a short jacket with trim, tapered trousers. Henri is wearing a longer jacket with fuller trousers. Image
One does not need to conform to classic Western ideals for gendered body types. But it helps to know that the classic male silhouette is shoulders broader than the hips, whereas the classic female silhouette is hips broader than shoulders (think: David and Venus)
Image
Image
Short jackets tend to emphasize the hips, which is why women's tailoring tends to feature shorter jackets than men's tailoring. (Although many women wear longer jackets for various reasons, including not wanting to conform to this feminine stereotype; and vice versa)
Image
Image
Compared to Henri's longer jacket, Macron's jacket tends to emphasize his hips more. But more importantly, when you shorten the jacket, you have to raise the buttoning point to keep a proper distance from the buttoning point to the hem. Image
When you raise the buttoning point, you do two things:

1. You shorten the lapel line
2. You limit how much the jacket can be taken in at the waist, which is the narrowest part of the person's torso.

These two things, when combined, limit that strong V-shaped figure. Image
When you shorten a suit jacket, you also have to make it trimmer to keep the correct proportions. And when you make the jacket trimmer, you also have to make the trousers trimmer. Everything moves in concert.
The prob is that Macron's jacket can only be taken in so much before it starts pulling. But his trousers are fairly slim. The effect is that his tailor has broken the suit into two distinct blocks: upper and lower. Henri's jacket flows into his fuller trousers, creating a whole. Image
Trimmer trousers are also more likely to catch on your legs, creating ripples that ruin what should be a clean line going from your waistband to cuff.
Image
Image
With a short jacket that emphasizes the hips, a high buttoning point, a short lapel line, a limited V-shaped silhouette, and trim trousers that dangle out from beneath the jacket like bead lines under a bell, you can end up looking like a sweet double popsicle.
Image
Image
I see a lot of people whose solution to improving a suit is to "take it in"—make it slimmer and slimmer until it conforms to something they saw in a magazine. But this does not work on every body type. Best to think about how the silhouette flatters you, not conform to trends. Image

• • •

Missing some Tweet in this thread? You can try to force a refresh
 

Keep Current with derek guy

derek guy Profile picture

Stay in touch and get notified when new unrolls are available from this author!

Read all threads

This Thread may be Removed Anytime!

PDF

Twitter may remove this content at anytime! Save it as PDF for later use!

Try unrolling a thread yourself!

how to unroll video
  1. Follow @ThreadReaderApp to mention us!

  2. From a Twitter thread mention us with a keyword "unroll"
@threadreaderapp unroll

Practice here first or read more on our help page!

More from @dieworkwear

Jan 9
The term "Goodyear welt construction" refers to how the soles have been attached to the uppers. In this method, the uppers, insole, and outsole are attached using a welt and some stitching. 🧵
Image
Goodyear welting is better than the cheaper and more popular method of making shoes, which is to attach the soles to the uppers using glue. It's more durable and easier to resole. Resoling shoes is like changing tires—you don't have to throw away good shoes when soles wear down Image
Ostensibly, with proper care and occasionally resoling, you can keep Goodyear welted shoes in regular rotation for ~20 years. But one potential failure point is the gemming, which is the canvas rib glued to the insole. If this slips during a resoling, the shoes are finished.
Image
Image
Read 7 tweets
Jan 8
HOW TO BUY BETTER SHOES WITHOUT SPENDING MORE MONEY

Let's talk about how you can buy better shoes without spending more money. This thread is aimed at people who spend less than $200 and people who buy designer shoes. 🧵 Image
We should first talk about how shoes are made.

Shoes are made from leather, which comes from animals. And when leather arrives at a tannery, it can be marred with scars and imperfections (e.g., insect bites). Image
The best shoe producers use the best materials, but lower-end companies and designer brands (which are often making mediocre shoes) try to cut costs where they can. That means they are using lower-quality materials.

What does lower-quality material mean?
Read 20 tweets
Jan 7
Do people know how to protect shoes in the winter? If you have suede shoes, you can spray them with Saphir Super Invulner, Tarrago Nano Protector, or Allen Edmonds's Water Protector to protect them from rain.

The only thing about these sprays is that you want to avoid things with silicon, which can be bad for leather. You also want to avoid using them on smooth leather dress shoes since they can prevent the leather from taking up leather conditioner or polish. Image
The shoes won't be waterproof, so it's not like you can wade in streams. But they'll be water-resistant, which is good enough for light rain. I apply them once every winter or two, depending on whether I think the spray has worn off.
Read 7 tweets
Jan 4
DRESSING SHORTER MALE FIGURES

Some people have asked me to do a thread on how to dress shorter male figures. So here's the thread. 🧵
There are a lot of guides online that treat the process of building a wardrobe like some kind of engineering problem. Everything is deduced from supposed scientific principles, like how certain colors go together or how certain lines lengthen or widen the figure.
Image
Image
I think the process of building a wardrobe is more like learning how to speak a language, and less like solving a math problem. The other approaches feel very pseudo-scientific to me, and they often feel like they start from a position of fear or shame.
Read 28 tweets
Jan 3
I don't totally disagree, but I think guys are more likely to get this wrong than get it right, largely because getting a black dress shirt right requires a lot of attention to fit, silhouette, and material. 🧵
the prob with a black dress shirt is that it can easily make you look like a kid going to prom or the host at a restaurant.

this fit is bad because the shirt is made from a smooth, dressy poplin, the tie is ugly, and the tie and pocket square are made from the same material. Image
12 years ago, Michael Anton—author of the "Flight 93 Election" essay and a senior national security official in the Trump administration—wrote on StyleForum that black shirts have "always been considered both in bad taste and the mark of the lower, and even criminal, classes." Image
Read 12 tweets
Jan 2
One of my tailors, Fred Nieddu, made all of the menswear for The Crown, including everything from the suits to sportswear. The clothes were surprisingly accurate in some ways but also deviated in others. Let's talk about those subtle details. 🧵
Like many young men, King Charles was influenced by the fashion of his day and only found his style later in life. In the 1960s, he wore single-breasted suits and sport coats with razor-thin lapels. Narrow lapels during this time were considered very "modern" (think: Mad Men).
Image
Image
Again, influenced by the fashion of his day, Charles switched to a wider lapel in the 1970s but still stuck with a single-breasted closure. Note how, in the '60s, his lapel ended about 1/3rd way from collar to shoulder seam. Below, it's closer to 1/2 (a more classic width)
Image
Image
Read 24 tweets

Did Thread Reader help you today?

Support us! We are indie developers!


This site is made by just two indie developers on a laptop doing marketing, support and development! Read more about the story.

Become a Premium Member ($3/month or $30/year) and get exclusive features!

Become Premium

Don't want to be a Premium member but still want to support us?

Make a small donation by buying us coffee ($5) or help with server cost ($10)

Donate via Paypal

Or Donate anonymously using crypto!

Ethereum

0xfe58350B80634f60Fa6Dc149a72b4DFbc17D341E copy

Bitcoin

3ATGMxNzCUFzxpMCHL5sWSt4DVtS8UqXpi copy

Thank you for your support!

Follow Us!

:(