My latest acquisition is here! It's a Compaq LTE 5000... with the coveted 640x480 display! It's a little wonky on boot, and had a bad DC to DC inverter, broken battery clip, and a dead HDD, but the most important part is the GOOD SCREEN! I'm excited!
It's booting now. I think the mobo is stuck in dock mode. But I swapped out for a good board. This system had a 64MB upgrade in it too!
Woohoo! I sprayed the other board with a half gallon of contact cleaner and now it is booting!! 🎉🎉
Since MemTest made it "far enough," going to flash the BIOS
Ok, not really a half gallon, but enough to make a difference 😁
Haha, here we go 😅
Oh yeah, good old version 7.20. It's the best version!
All back together now! Doesn't take me long these days! Let's pull the leaking cells out of the battery and tackle the dead HDD
Yummy
I put the battery shell back together, and used it to fill the battery void in the laptop. Laptop is also much lighter now.
Haha! I gave the hard drive some hits with the end of a screwdriver, and look at that!
Simply fantastic!! I'm happy!! Anyway, thanks for following along.
@threadreaderapp unroll
• • •
Missing some Tweet in this thread? You can try to
force a refresh
I got a few optical drives in the mail today. Let's get them tested. Time for a quick 🧵
Okay, here we go. First up is a Toshiba XM-5302B. This is a 4X IDE drive! I loaded a Microsoft Money '99 CD into the drive, and this drive works GREAT!!
Next up, we have this Mitsumi CRMC-FX4831T 48X drive. Once again, we load up the MS Money disk, and pass!!
Let's talk about my newest PC acquisition, which might be the most budget build ever 🤣. But there was a reason for buying it. I'll cover that... along with a Windows 95 installation, in a 🧵. Let's go!
First, why did I buy this? Well, the plan was to do a case swap with another system I had, which had some strange "fit" issues. However, that planned got smashed... literally. So, I thought we might as well explore what's left of this PC!
This system has a PC Chips M748MR motherboard, an Intel Celeron 400 MHz processor, and 16MB of RAM. Yikes! And of course the case is nothing fancy, but is nostalgic for me. But yea, this is the most budget build ever, for sure!
I just watched a video where YouTuber Action Retro set up a web server on a floppy disk using ELKS (the Embeddable Linux Kernel Subset). I thought, I have to try this for myself! Let's talk about it briefly in a 🧵
So, first of all, what is ELKS? It's the Embeddable Linux Kernel Subset, and it will run on a wide range of hardware, including 8088 systems. Pretty wild for a modern product! If you want to read more or try it out, GitHub repo is here: github.com/ghaerr/elks
Alright, let's go. I need to choose a system that will support the networking for ELKS. Turning to the Wiki, as of right now, the network cards supported are NE1000, NE2000, Western Digital 8003, Western Digital 8013, and 3com Ethernet III (3c509). My 486 DX4 has a 3Com 3c509!
I got a new DOS file transfer toy! Now, these have been around since the dawn of time, but let's talk about it: a MicroSD to LPT Printer Port Adapter. We'll give it a test on my Compaq LTE 5400. Time for a 🧵
First, if you are interested in reading about these, there is a thread on Vogons! Included in that thread is where I found the DOS drivers for it, you can go here for that, and to read about this device! vogons.org/viewtopic.php?…
Also, here's a few more perspective shots of it, captured from different angles.
And speaking of the past, here's what I had before today: four cards. These Xircom RealPort Ethernet 10/100 cards are great for getting a laptop without Internet connected to a wired network!
My holiday break is quickly coming to an end. So, I think it's time to power on the retro PCs that I have yet to power on recently. I am sure this will go flawlessly 😂. Let's do most of this, in real time, in a 🧵 here!
Alright, you've already seen the first three. My trusty, original 486DX4/100 powered right up, as did the Packard Bell Multimedia 601 Pentium 233 MMX
How about the Kehtron 486 DX/50? Weeelll.. the front seven segment display needed reconnected (I really should fix this permanently), and the sound card was being a pain, but I moved it over one slot and it is now working!