How do they calculate: 1. Valve area 2. Mean AV gradient 3. Max AV gradient
2/14
Essential Principles: 1. The effective orifice area is always smaller than the anatomical orifice area
This effective orifice area is what is calculated
It is the key determinant of survival 2. Continuity equation
Conservation of mass
3/14
Continuity equation:
A2 X V2 = A1 x V1
(AVA) x (AV VTI) = (LVOT CSA) x (LVOT VTI)
AVA = [(LVOT CSA) x (LVOT VTI)]/ AV VTI
4/14
We need to measure 3 of 4 variables
The 4th is unknown and is the AV effective orifice area
A1: LVOT cross sectional area
Measure at level of cusp insertion
Inner edge to inner edge
Mid systole
5/14
Measuring V1 - LVOT VTI
6/14
LVOT VTI
Pulse wave doppler!
Remember - Shave the whiskers!
7/14
And lastly measure V2: AV VTI
Continous wave doppler!
Tracing the doppler envelope also calculates Mean and Max gradients using the simplified Bernoulli Equation
8/14
And to explain:
9/14
How can you make sure you have the seen the maximum gradient?
1. Focused AV 5ch view 2. Right parasternal view
10/14
Focused AV 5ch:
Slide probe laterally, in the same ribspace - towards the axilla to line up the cursor
11/14
Right parasternal:
1. Lie the patient in the RIGHT lateral position 2. Obtain standard PLAX view in right lateral position 3. Follow the path of the ascending aorta across the sternum 4. Rock medially + tail up
Probe now faces down the ascending aorta through the AV
12/14
Once Identified - use the pedoff probe to assess
1/9 Tuesdays Tweetorial:
You are in cardiothoracic theatre doing a mitral valve replacement for severe MR
The anaesthetic consultant is doing a TOE and keeps saying 'PISA'
U know its in Italy but have no idea why he keeps saying it
What is PISA and why is it used?
2/9 PISA = Proximal Isovelocity Surface Area
Blood is ejected -> LA
It converges at the mitral regurgitant orifice it forming hemispheres -> different blood velocity in each hemisphere
RCCs that are equidistant from the orifice(in each hemisphere) travel at similar speed
3/9 Each hemisphere has a radius
The radius that matters for calculations is the one where aliasing occurs (where color changes from blue to red or red to blue)
Remember:
Blue: RCCs moving Away from probe
Red: Towards the probe
The tricuspid regurgitation jet velocity shown was used in a critical care patient to estimate RV systolic pressure:
Vol control – tvol 420ml PEEP 10cmH20
Cardiovascular: MAP 67mmHg on Noradrenaline 0.3mcg/kg/min
2/13
His TRVmax is high:
Why should I not diagnose this patient with pulmonary hypertension in my echo report?
2 are correct:
a. not steady state
b. Off axis cursor
c. Echo cannot diagnose it
d. Poor 2D view
3/13
Answer:
a, c and possibly b!
Lets start with what TR vmax means and how it is calculated