I have a few updates for the Re-Enlightened PC that I built yesterday! Let's talk about them in a š§µ here
First of all, I completed a retr0brite on the combo floppy disk drive. I think it looks a little better now! Still not a perfect match, but close enough!
Second, I swapped out the Trident PCI video card for an S3 86C75 Virge/DX PCI card. I actually tried two Trident cards, and they were both being a pain. This card looks SHARP! Very pleased with it.
Third, I worked through some issues with the combo floppy drive. I think it got somewhat out of alignment. I gave it a quick cleaning and kept on trying disks, eventually it reset itself. These things are known to be super fragile.
I also took some time to try out Wake on LAN. I used the DOS utility driver that I wrote last time to "force" the card to be ready to wake up! I also make sure settings were set in BIOS
Here's a little video demonstrating wake on LAN. I used my phone to send a "magic packet." Had to get out my fancy camera for this shot since I usually film with my phone š
Anyway, that's all for now. I am absolutely LOVING this new old stock case. And don't worry, I have a beige CD-ROM on the way. Thanks for following along!
@threadreaderapp unroll
⢠⢠ā¢
Missing some Tweet in this thread? You can try to
force a refresh
I have a bunch of ISA 16-bit sound cards to test! Let's test them (or at least try to test them) and select one to put in the new Re-Enlightened PC. Let's go! š§µ
Before we get too far into this, I copied over DOS/Win3.1x drivers that we will need for the five different sound cards, and also made a backup of my DOS/Win3.1x partition, since we'll most certainly be screwing it up. I also copied over some games to test in DOS.
The first card we are going to test is one I have set up before: A MediaMagic ISP-16. I started to install drivers, and realized that they HAD to install from a floppy disk, so I copied them there!
I have some testing updates from yesterday, and it is all good news! Time for a quick š§µ
First, as you might have gathered from the intro post, the new PC I built in the Enlight case passed a round of MemTest86+. I think I am going to nickname this PC "Re-enlightenment" since I already have a similar PC š
Second, the 3Com Etherlink III card worked in this system after running the setup program and flipping it to a different address (via Plug and Play). I think that maybe my Pacman PCs Ali Express mobo might be flawed, who knows
Alright, I have a confession, I caved and bought one of those NEW OLD STOCK ENLIGHT ATX CASES for sale on eBay!! It arrived today. What do you say, shall we build a PC? Let's do this! Time for a š§µ
First, an unboxing since I have the original box!! This case is an Enlight 7250AKD. It is a little different than my other Enlight case, but is pretty similar. And it is GOREGEOUS!
Here's a first look at the back of the case, and I also popped off the front of the case. Look at all of that shiny metal!
I have a bunch of things to test out! We won't get through all of them, but let's test what we can. We'll use the Pacman PC for our test rig. Let's go! Time for a š§µ
First, we'll test some PSUs. Yes, I know, this is risky, I am ok with that. The Antec ATX PSU that I tested had a "whine" to it, so I pulled it. The Enlight ATX PSU tested fine. I let the system boot into Hannah Montana Linux and set for a few minutes! Pass.
Let's test this Creative optical. The last time I did some testing, it tested bad, but I believe in second changes. Sadly, not even a lens cleaning could save it. Fail.
I spent a few minutes today setting up this Dell Latitude D600 laptop. It's a neat and zippy little Windows XP PC. Let's talk about it in a š§µ here!
Here are the specs! Pentium M 1.60 GHz, and 2GB of memory. Pretty nice specs. And the battery is charging up nicely too. Score!
Unfortunately, the HDD is dead on this. So I put in a CF card adapter, using the old HDD to help align its placement. 4GB is going to be anemic for Windows XP, but it will get us by for now.
Alright, let's check out the $10 photo booth PC that I picked up on Thursday. Allegedly this PC was used in a mall photo booth kiosk, and it definitely is weird... and, well, I did get it to power on a few times, but that was it š . Time for a š§µ
First, in addition to being a desktop ATX case, it does have an interesting black oval on the front! Probably for infrared, I didn't take it apart, I was lazy. If so, that's a cool feature. And this ATX case has an AT mobo in it, with an AT I/O shield!
As noted in the first post, this PC has some weird stuff. Looks like this DE9 connector supplied... power. Yikes! Yea, I took that out, we don't want to have any surprises later. Guessing this powered some other kiosk device.