Yesterday the Mt Hayes wildfire (V62669) received additional support from 9 parattack firefighters (smokejumpers), dispatched from the Prince George Fire Centre.
Located in #FortStJohn & #MackenzieBC and utilized heavily in the north, parattack jumpships can respond anywhere...
in the province within 2 hours, staffing incidents independently or providing support to resources already on the ground. On arrival to an incident parattack can deploy 6,000 lbs of equipment as well as up to 13 experienced firefighters - crews as well as officers capable of...
filling command roles or providing falling support. Well-suited to remote areas of the province, but not limited to them, smokejumpers are a highly mobile & versatile resource taking advantage of the speed, range, payload & cost efficiency of fixed wing aircraft.
In the first photo are wind drift indicators, or streamers, dropped by the spotter to evaluate winds & determine where the jumpers will be let out.
The #BCWildfire Service calls on the skills and expertise of many contractors each year and selects qualified and appropriate resources for its fire operations.
BC Wildfire Service personnel work closely with contractor firefighters to determine how to best match their availability and expertise with operational objectives.
This short video showcases some of the hard working contractors and Quebecois who are currently dedicating their time to fight the White Rock Lake wildfire (K61884), west of #VernonBC.
“My name is Kyle Young and I am an Incident Commander with the #BCWildfire Service. I am writing this post rather than sharing a video message because, frankly, it would be too emotional for me."
"I am someone that ground crews, my kids, and many other people, look up to for guidance through these challenging seasons. I have been doing this job for 16 years. I am a third generation wildland firefighter, following my father and grandfather."
"I have a long history within this organization and the love I have for this job is what drives me every day, along with the support I receive from my family and co-workers."
If conditions on site are favourable later this morning, the #BCWildfire Service will be conducting a planned aerial & hand ignition on the Flat Lake wildfire (C41602). Smoke is anticipated to be visible from #100MileHouse, #70MileHouse, #BCHwy97 and the surrounding communities.
This planned ignition operation is being considered for the N edge of the fire perimeter in the area south of Moose Valley Park, between Gustafsen Lake & Holden Lake. The purpose of the planned ignition is to remove unburnt fuels between the fire perimeter and pre-determined...
...control lines (roads and machine guards) and will cover approximately 600 hectares. This will bring the fire perimeter to more easily accessible locations where ground crews can safely work and deliver water directly to the fire’s edge.
@environmentca has issued a Heat Warning for the South Coast of British Columbia. Thursday and Friday will be the hottest days of the week. For more information go to: weather.gc.ca/warnings/index….
On Aug. 7, a band of thunderstorms crossed the area spanning north of Campbell River onto the mainland north of Powell River. Close to 160 lightning strikes were detected, resulting in 5 fires. In the below image, the blue and green markings identify where lightning has struck.
The Coastal Fire Centre is preparing to respond to any holdover fires which may become visible as a result of hot weather and lower relative humidity’s over the coming days. With a holdover lightning strike, there can be a delay in a #BCwildfire becoming visible.
If conditions on site are favourable this morning the #BCWildfire Service will be conducting aerial planned ignitions on the Flat Lake wildfire (C41602), approximately 27 kilometres southwest of #100MileHouse.
Smoke is anticipated to be visible from 70 Mile House, #BCHWY97 and the surrounding communities.
This planned ignition operation is being considered for the southwest corner of the fire perimeter in the area between Meadow Lake Road, Dog Creek Road and the Gustafson East FSR.
The purpose of the planned ignition is to remove unburnt fuels between the fire perimeter and pre-determined control lines (roads and machine guards) and will cover approximately 800 hectares.
As new technology emerges, the #BCWildfire Service is reminding the public to understand their best uses. Although online fire detection tools, such as MODIS, can be helpful to gather information about wildfires in your area, they can also cause a lot of confusion and anxiety.
MODIS uses satellite sensors to record the intensity of electromagnetic radiation from Earth in various spectral wavelengths or channels. This means heat signatures are picked up by the satellite and the map is populated with pixels.
The satellite can flag smoke, or large open areas such as cut blocks, as a heat signature. It will also pick up a heat signature if the ground around a fire is cooler than the fire itself, for example in the morning.