If you're interested in orthopedics you'll definitely want to check this review out!
π¦΄βοΈπ§΅π
The ankle is a complex hinge joint comprised of the tibial plafond, talar dome, and distal fibula.
Ankle fractures most commonly occur in elderly females, with roughly 70% being isolated malleolar, 20% being bimalleolar, and 5-10% being trimalleolar. (1)
When first examining a patient with an ankle injury, you can utilize the Ottawa Ankle Rules to determine if you should x-ray the patient.
Our review of The Ottawa Ankle Rules can be found here:
A Maisonneuve fracture is a spiral proximal fibula fracture, that should be suspected in a patient with tenderness over the fibular head after an ankle injury.
Ankle radiographs may be normal and if not vigilant this fracture may initially be missed.
There are three views in an ankle series: AP, Lateral, and Mortise. A mortise view is taken with the ankle in 20Β° internal rotation.
The syndesmosis can be assessed radiographically by an ER stress view, gravity stress view, or by using measurements on AP/mortise views.
Normal radiographic measurements suggesting syndesmotic stability:
Medial Clear Space:
β― < 4 mm on AP/mortise
Tib-fib Clear Space:
β― < 6 mm on AP/Mortise
Tib-fib overlap:
β― > 6 mm on AP
β― > 1 mm on Mortise
There are two main classification systems for ankle fractures. Lauge-Hansen and Webers.
Lauge-Hansen describes ankle injuries as the position of the foot and then the force applied.
Weber classifies fibula fractures based on their relation to the syndesmosis.
Which of the following is associated with a vertical medial malleolar fracture based on the Lauge-Hansen classification system?
The Lauge-Hansen system has 4 types and each has a unique feature (shown below). The classifications have stages and more detail, this is an extremely simplified version...
Supination-adduction is identifiable by a vertical medial mal fx other types produce transverse/oblique fx
Webers classification system classifies distal fibula fractures based on their orientation to the syndesmosis.
The more proximal the fracture the higher likely hood of syndesmotic disruption.
Another eponym fracture to be aware of is the Bosworth fracture (shown below). This occurs when the proximal fibular fragment becomes fixed on the posterior tibial tubercle.
This type of fracture pattern can hinder reduction.
Another type of ankle fracture to be aware of is the bimalleolar equivalent. This fracture occurs when there is an isolated lateral malleoli fracture with disruption of the syndesmosis. (shown below)
Posterior malleolar fragments may be subtle or obscured by a fibular fracture.
You may see a misty mountain sign (left) or a double contour sign indicating a posterior malleolar fracture.
Operative Indications:
Bi and tri-malleolar fractures.
Bi-malleolar equivalents.
Bosworth fractures.
Open fractures.
Posterior malleolar fragments with >2 mm articular step-off or >25% joint involvement.
Fractures are treated with ORIF and treatment depends on the fracture pattern.
Lateral malleolar fractures may be treated with a lag screw + neutralization plate, fibular nail, or anti-glide plate (shown below).
Transverse/oblique medial malleoli fx are commonly fixed using two cannulated screws (shown below) or tight rope constructs.
Vertical medial malleoli fractures may be repaired with a buttress plate.
Posterior malleoli may be treated with cannulated screw fixation from either A->P or P->A or with buttress plating.
Syndesmotic injury may be treated with syndesmotic screws (shown below) or tight rope.
Most tibial pilon fractures result from high-energy axial loading through the talus.
They are also commonly referred to as Tibial Plafond fractures. The tibial plafond is the distal articular surface of the tibia, which gained the name from its French meaning, "ceiling".
The term tibial pilon was first used by Γtienne Destot in 1911 to describe the interaction of the distal tibia and talus during axial loading.
Pilon is the French term for "pestle".
The term was later adopted as a term for vertical impaction fractures of the distal tibia.
It is important for clinicians to be aware of eponymous fractures as they are commonly used and allow for a succinct description of sometimes complex injuries.
The humeral shaft is defined as the area distal to the surgical neck and proximal to the epicondyles.
The commonality of fracture is:
Middle β > Proximal β > Distal β shaft
The deforming forces of humeral shaft fractures usually result in what type of deformity?
Due to the muscular pull of the deltoid on the proximal fragment and medial/superior pull on the distal fragment, humeral shaft fractures tend to develop varus angulation.
Humeral shaft fractures are forgiving, and modest angulation can be overcome by the shoulders' large ROM.