, 16 tweets, 7 min read Read on Twitter
Physicist Heinz Pommer's explanation of the surreal "explosion" of the South Tower on 9/11 - like top 30 floors tilting at 15° before vanishing! - is the best explanation out there. And he continues to work with other physicists to refine his model! #911Nuked
8.4.1 Impact of the plane

“The event of the plane opens the building on top."

Proof: It is confirmed/documented that the building was also opened on the opposite side.

8.4.2 Formation of a channel to the basement, elevator shafts start to get connected

To create a nuclear chimney, elevator shafts are connected first to nuclear device on ground level, destroying the lobby. Then different sections connected until single shaft is created.

8.4.3 Ignition – start of circular propagation of a shockwave in the ground

"After activation of the nuclear device a spherical shockwave is expanding."

Proof: The presence of uranium fission products in the dust samples is confirmed/documented

8.4.4 Formation of non-radioactive iron isotopes & steel droplets due to absorption of fast neutrons

A strong impulse of neutron radiation is sent upwards through the chimney, evaporating the inner core columns of the tower.

Proof: Abundant steel droplets in dust samples

8.4.5 Outpouring liquid metal from the building's fissures

Proof: Outpouring streams of molten steel are confirmed/documented

8.4.6 Reflected shockwave returning to the center of the explosion, soliton formation starts

The rockbed has absorbed the shock of the explosion, the impulse response starts pushing inward to the center of explosion.

Proof: Registration of shockwaves confirmed/documented

8.4.7 Upshooting iron vapor reaching the altitude of the impact zone – pressure equalization takes place

When the upshooting needle or “soliton” reaches the impact zone, pressure equalization takes place.

Proof: Material ejection & building's 'sighing' prior to collapse

8.4.8 Soliton neutralizes the angular momentum at 15°

"Freefall of the structure begins. The still rising soliton pushes the top of the tower aside. Its rotation is stabilized at 15° by the soliton which is crushed down by [the] tower’s top."

8.4.9 Soliton is compressed and pushed against the outer walls – the result being the start of steam explosions

Where the superhot soliton touches the outer walls, steel explosions start, seen as outshooting squibs.

Proof: Multiple steam explosions w/material ejection

8.4.10 Complete disintegration of the building, soliton breaks through the top of the South Tower

"Finally, the soliton breaks through the building’s top releasing its energy."

Proof: Formation of an outer mushroom cloud and an inner, central cloud confirmed/documented

8.4.11 Settling dust revealing building structures still standing near the basement

"During disintegration, some structures remain standing, forming a 'spire'."

Proof: Building structures still standing near the basement are confirmed/documented

8.4.12 Cleanup – high levels of radioactivity only directly above the melting pot

"After clean-up, only the radioactive bed of formerly molten rock remains."

Proof: Melting pot of formerly molten rock confirmed/documented

8.4.13 The cover-up – outshining the Cherenkov radiation

Proof: Installation of searchlights with the same wavelength as the Cherenkov radiation is confirmed/documented

8.4.14 Sealing the grounds – installation of radiation shields

Proof: Installation of water pools confirmed/documented

It would be really great if @AE911Truth @lcfor911 @Consensus911 could address physicist Heinz Pommer's model of the nuclear demolition of South Tower so we keep moving toward realizing #911Truth in 2019!

For more info, check out his great website 911history.de

Missing some Tweet in this thread?
You can try to force a refresh.

Like this thread? Get email updates or save it to PDF!

Subscribe to Bruce Baird
Profile picture

Get real-time email alerts when new unrolls are available from this author!

This content may be removed anytime!

Twitter may remove this content at anytime, convert it as a PDF, save and print for later use!

Try unrolling a thread yourself!

how to unroll video

1) Follow Thread Reader App on Twitter so you can easily mention us!

2) Go to a Twitter thread (series of Tweets by the same owner) and mention us with a keyword "unroll" @threadreaderapp unroll

You can practice here first or read more on our help page!

Did Thread Reader help you today?

Support us! We are indie developers!

This site is made by just three indie developers on a laptop doing marketing, support and development! Read more about the story.

Become a Premium Member and get exclusive features!

Premium member ($3.00/month or $30.00/year)

Too expensive? Make a small donation by buying us coffee ($5) or help with server cost ($10)

Donate via Paypal Become our Patreon

Thank you for your support!