Your Energy Your Way Profile picture
Oct 16, 2021 10 tweets 12 min read Read on X
My task this weekend, ahead of the heat and buildings strategy launch and #cop26 is to show the work involved in installing a #heatpump and #lowtemp heating. To get to #netzero you don't have to have a heat pump, but you will need low temp heating and an energy efficient home 1/9
Firstly, even if you get a hydrogen or electric boiler, you are going to need to run your heating cooler in the less cold weather and hotter in the colder weather. This saves energy and is called weather compensation. For some this will mean bigger radiators and larger pipes 2/9
Just to stress, #lowtemp heating, running the water in your heating system between 30-50 degrees instead of 70-80 (with good home insulation) is going to be needed in EVERY home to reach #NetZero. This will actually make your home more comfortable and still as hot as you like 3/9
Hard to imagine a @netzero home without hot water storage. Instant hot water from a combi boiler is inefficient and doesn't allow us to flex the timing to help the grid out, which we're going to need to do manage grid capacity. You need a cylinder or @SunampLtd heat battery 4/9
So, you've got #lowtemp heating and you want a #heatpump. Ground source are most efficient and lower #CO2 because they don't work as hard in the cold as #ashp when the grid is struggling. Firstly you need a heat source - boreholes, or horizontal pipes if you own a spare field 5/9
No field and can't afford £20k plus for a boreholes? Then you need an #ashp air source heat pump and somewhere to put it. Must be 1m from your boundary and 5m ish from neighbour's windows depending on size. Plus a firm base to sit on allowing for water to drip from underneath 6/9
Then you need to get 2x28mm (minimum), well lagged pipes into your house, plus an electricity supply out to your #heatpump. These pipes might need to run under a path, up a garden in a trench, depending on where you site your heat pump 7/9
This all connects up via a small buffer cylinder or low loss header to your radiators or UFH and hot water cylinder. There you have it, from a 90% efficient (at best) gas boiler to a 300% efficient #heatpump (that's the minimum you should expect when averaged across the year) 8/9
So next time you hear the costs of a heat pump compared to a gas or hydrogen boiler remember, they will ALL need large enough radiators, correct pipework, good controls, low flow temp to get to #netzero. Most of these are one off costs the whole country needs to do once only 9/9

• • •

Missing some Tweet in this thread? You can try to force a refresh
 

Keep Current with Your Energy Your Way

Your Energy Your Way Profile picture

Stay in touch and get notified when new unrolls are available from this author!

Read all threads

This Thread may be Removed Anytime!

PDF

Twitter may remove this content at anytime! Save it as PDF for later use!

Try unrolling a thread yourself!

how to unroll video
  1. Follow @ThreadReaderApp to mention us!

  2. From a Twitter thread mention us with a keyword "unroll"
@threadreaderapp unroll

Practice here first or read more on our help page!

More from @Your_Energy_YW

Feb 6, 2021
Aware that #heatpumps are currently costly and difficult to fit, but this article is neither objective, nor factual. Error 1: "When it comes to winter warming, you can't beat gas central heating.". Fact: Low temp heating with a heat pump is more comfortable than with a gas boiler
Error 2 "some of the new-style kit can't heat the UK's cold, draughty houses." Ignoring that some of our old-style kit can't heat our draughty houses and we have the worst #fuelpoverty in Europe. Fact #heatpumps can heat draughty houses, but why would you want to? Fix the homes.
Error 3: "Hydrogen lobbyists say it can travel through existing pipes - at least until it reaches the home." Key words there (apart from the 2nd) are the last 7. Presents #heatpumps as disruptive, which the installation can be, but then glosses over replacing internal gas pipes.
Read 7 tweets
Dec 12, 2020
(1/4) There has been a lot of chat this week about the cost of #retrofit #heatpump installs. Here's an installer's view on the three types of costs that drive it - 1. Costs that won't change 2. Costs that intervention could change 3. Costs that will change as the market grows.
(2/4) The first time you retrofit a #heatpump it will always be more expensive than a new gas boiler. You have to put in a new hot water tank, run pipework outside, build a base for the heat pump, ensure radiators and pipework are adequate. These costs vary from house to house.
(3/4) There are also costs that government action could reduce: streamline the process to connect to the electricity grid; invest in training installers; mandate low temp boiler installs; make the planning conditions more sensible (1m from property boundary, why 😡?)
Read 5 tweets

Did Thread Reader help you today?

Support us! We are indie developers!


This site is made by just two indie developers on a laptop doing marketing, support and development! Read more about the story.

Become a Premium Member ($3/month or $30/year) and get exclusive features!

Become Premium

Don't want to be a Premium member but still want to support us?

Make a small donation by buying us coffee ($5) or help with server cost ($10)

Donate via Paypal

Or Donate anonymously using crypto!

Ethereum

0xfe58350B80634f60Fa6Dc149a72b4DFbc17D341E copy

Bitcoin

3ATGMxNzCUFzxpMCHL5sWSt4DVtS8UqXpi copy

Thank you for your support!

Follow Us!

:(